Industry News
Home / News (Page 8)
  • What Problems are Prone to Vane Pumps

    Loud noise There are two reasons for the loud noise of Vane Pumps, the oil in the oil tank is insufficient or the pump core is worn. When this kind of problem occurs, you should first check whether the fuel tank is sufficient, and then check the pump core to see where the problem is. The system oil temperature is too high The reason for the high oi...

  • Reasons for the Easy Fracture of Vane Pump Blades

    When using a Vane Pumps, the vane of the vane pump often breaks, and the stator wears severely, but I don't know what caused this situation. The above problems are generally caused by the following points: Hydraulic oil problem The system oil temperature is too high, causing the friction between the stator and the blade to fail to form a protective...

  • The Development Status of the Vane Pump Industry

    The lack of standards makes the products of various Vane Pumps manufacturers unable to match, which also brings huge problems to the development of the entire industry. Because there is no unified technical standard, it means that the products produced by various manufacturers cannot be used together with the systems or products of other manufactur...

  • Marketing Model of Vane Pump Industry

    For traditional companies such as Vane Pumps companies, stores or specialty stores are still the main marketing methods, so offline promotional activities are particularly important. Companies have sufficient self-positioning and then use high-quality to carry out more terminal activities to occupy the market. A seat. In the current diversification...

  • How to Repair Hydraulic Gear Oil Pump?

    Repair the inner cavity of the Hydraulic Vane Pumps casing. After the inner cavity of the pump casing is worn out, the inner cavity inserting method is generally adopted to repair, that is, the inner cavity is enlarged and then inserting cast iron or steel bushings. After inserting the sleeve, the inner cavity is lined with 5. Repair of the valve s...

  • Analysis of Six Advantages of Hydraulic Internal Gear Pump

    The Vane Pumps has simple structure, uniform flow, large displacement and high efficiency, with more than 10,000 tons per hour. Gear pumps are simple in structure, reliable in work, and can produce higher liquid pressure, but their displacement is not large, and they are often used to transport oil. Plunger pumps belong to the category of reciproca...

  • The structure and characteristics of Internal Gear Pumps

    Today we will introduce the structure and characteristics of Internal Gear Pumps: Structure: The pump is mainly composed of inner and outer rotors, shafts, pump bodies, front covers, brackets, seals, bearings, etc. The seal has two forms: mechanical seal and packing seal. For high temperature, high viscosity and strong corrosive media, packing seal...