Industry News
Home / News (Page 5)
  • Fuel Tank Oil Pumps : How Does It Work?

    The    Oil Pumps     is definitely pumping oil because the literal meaning is very simple and clear, so the main role of the oil pump in the tank is to pump oil, but its work is not just so easy, it also has a deep role.     In order to understand this problem, you must understand the working characteristics of the EFI system, because onl...

  • Vane Pumps Operating Condition Adjustment Method

    The operating point of the    Vane Pumps    is determined by the intersection of the performance curve of the pump and the characteristic curve of the pumping device. When selecting and using the pump, the performance parameters of the operating point of the pump often deviate from the highest efficiency point, which does not meet the actual needs,...

  • The Role Of Vane Pumps On Vehicles

    The vane pump is one of the important technologies in the aircraft and travel industry. They contribute to the functions of these industries. Without them, they will not only be affected in the aircraft and tourism industries, but also affect the entire world economy.   1. They are essential for both light and commercial aircraft Vane pumps ar...

  • Common Oil Pumps Failure Symptoms

    Although most drivers may never need to replace the fuel pump, it is important to understand the symptoms to prevent problems with the vehicle. The oil pump is an indispensable part of vehicle engine performance. If the oil pump fails, it may seriously damage the car. The engine oil pump sucks the oil out of the oil pan and then pumps it into the b...

  • In The Automotive Industry, Hydraulic Vane Pumps Are Essential

    The increasing global population has put a lot of pressure on the industrial sector. Industries such as manufacturing, agriculture, mining, and construction are forced to operate at speeds to meet the growing demand of a growing population. Therefore, stakeholders have seen the need to increase productivity while trying to balance the costs involve...

  • Hydraulic Pumps Have Various Uses

    Hydraulic pumps are very simple and have many uses. Their basic design is a piston in a cylinder that exerts pressure on an incompressible liquid (usually oil) and that force is transferred to another piston, which will do something useful for you. In this process, the force usually doubles, so the second piston can achieve a greater effect than th...

  • Operation Process Of Internal Gear Pumps

    Internal gear pumps work on the same principle, but the two interlocking gears have different sizes, one interlocking gear rotates inside the other. The larger gear (rotor) is an internal gear, that is, its teeth protrude inside. Within this range, a smaller external gear (idler – only drives the rotor) is installed eccentrically. It is designed to...

  • Preventive Maintenance Of Hydraulic Pumps

    Every mechanical part needs maintenance, as does the hydraulic pump. Obviously, proper maintenance can keep the mechanical products in good condition. Otherwise, improper maintenance may cause many problems, which in turn will lead to more serious problems. Therefore, you should perform some preventive maintenance to avoid unnecessary failures. Pre...