Industry News
Home / News / Industry News / Common Oil Pumps Failure Symptoms

Common Oil Pumps Failure Symptoms

Although most drivers may never need to replace the fuel pump, it is important to understand the symptoms to prevent problems with the vehicle. The oil pump is an indispensable part of vehicle engine performance. If the oil pump fails, it may seriously damage the car. The engine oil pump sucks the oil out of the oil pan and then pumps it into the bearing through the oil filter.



The first symptom is likely to be that the engine or oil lamp indicator lights on your dashboard are on to warn you that there is a problem. This is still not always the case, and it is often the driver who fails to notice or ignore the light. Generally, if the oil lamp is on, it indicates that the oil pressure is low. This does not automatically indicate a problem with your oil pump, because there may be a leak, or your engine is burning oil. This problem can be solved by checking the dipstick and adding oil when the oil level is low. If the indicator is still on, you can check the following other symptoms:



Low oil pressure. A faulty oil pump will lose the ability to properly pump oil through the system. This will result in low oil pressure, which may cause further damage to the vehicle.


The engine operating temperature has increased. Oil can reduce the friction between various parts of the vehicle
Maintain temperature regulation during operation. When the engine oil flow is reduced, the parts will not maintain proper lubrication and become hot. Increased friction will increase the temperature and may cause more problems.


noise. Your vehicle hydraulic lift is an important part of engine operation, and it is also important to adequately lubricate it. When your engine is working normally, these elevators have almost no sound, but when the oil flow of the elevator is cut off, they start to make noise and wear unevenly. Replacing jacks is very expensive, and it is important to properly lubricate jacks.
In addition to hydraulic tappets, if the oil pump starts to malfunction, the valve train may start to make noise. This includes push rods, seals and valve guides. All these parts also need proper lubrication. Failure of the oil pump may cause a large amount of additional noise in the valve train system.



Finally, if the oil pump is not working properly, it may start to make noise. This is a less common problem than some of the other problems described here. If your oil pump starts to make a sound, it will be a harsh hum or howling. This is the result of wear of the internal gear mechanism. When it starts to malfunction, your oil pump may make a little noise.



Most drivers are unlikely to experience oil pump failure, but if you experience any of these symptoms, you may need to check the vehicle. When encountering problems, it is best to always repair parts, as long-term wear may shorten the life of the engine.



Zhejiang Yongling Hydraulic Machine Co , Ltd . is a professional China manufacturer and supplier of    Oil Pumps   . Our products are widely used in cutting, plastic, forging, engineering, leather, pressure, metallurgy, agriculture, transportation machinery and machine tools, hydraulic stations, automatic production lines and other fields. Follow us to learn more about oil pump product information and technical information: -lower-noise.html -lower-noise.html   



Views: 444